Leprechauns Welcome
Leprechauns in green caps over WELCOME in tall dark green serif letters, with a pot of gold, a shamrock and long swashes. A St. Patrick's Day door sign.
Download Free SVG- In the ZIP
- SVG, DXF, EPS, PNG, Read Me First guide, license
- Works with
- Cricut, Silhouette, laser software
- Detail
- Intricate, 2 color layers
- PNG size
- 11.3 × 4.3 in at 300 ppi
Free to use on physical products for personal projects or a small business. Read the license
Plan your project
For a painted wood sign you’ll need:
- Wood sign blank or board
- Sandpaper
- Base coat paint
- Stencil vinyl
- Transfer tape
- Weeding tool
- Scraper
- Acrylic paint for the lettering
- Stencil brush or foam pouncer
Supplies for laser wood signs
For a laser-engraved wood sign you’ll need:
- Laser engraver or cutter
- Wood board or sign blank
- Masking tape to reduce scorch marks
- Sandpaper
- Wood glue for layered cut pieces
- Clear sealer or finishing oil
For a painted porch sign you’ll need:
- Tall wood board or porch sign blank
- Exterior paint or stain
- Stencil vinyl
- Transfer tape
- Weeding tool
- Scraper
- Outdoor acrylic paint
- Stencil brush or foam pouncer
- Clear outdoor sealer
Supplies for laser porch signs
For a laser-engraved porch sign you’ll need:
- Laser engraver or cutter with a bed large enough for the board
- Tall wood board or porch sign blank
- Masking tape to reduce scorch marks
- Sandpaper
- Wood glue for layered cut pieces
- Clear outdoor sealer
For a wood round you’ll need:
- Wood round or slice
- Sandpaper
- Adhesive vinyl or stencil vinyl
- Transfer tape
- Weeding tool
- Scraper
- Acrylic paint and a stencil brush, for a painted look
- Hanger or easel stand
Supplies for laser wood rounds
For a laser-engraved wood round you’ll need:
- Laser engraver
- Wood round or slice, sanded flat
- Masking tape to reduce scorch marks
- Clear sealer or finishing oil
- Hanger or easel stand
For a painted doormat you’ll need:
- Plain coir doormat
- Stencil vinyl or a cut stencil sheet
- Weeding tool
- Outdoor acrylic or spray paint
- Stiff stencil brush
- Painter's tape
Tips by method
The swash lines are thin. Cut it at 12 inches or wider.
- Adhesive or heat-transfer vinyl
- Cut it large. The fine lines and small pieces are hard to weed at small sizes.
- Laser
- Engrave it. The details are too fine to cut cleanly.
- Sublimation
- Print the PNG. No cutting or weeding.
More St. Patrick's Day designs
See all 30
The Complete Vault All 1,026 designs in five downloads.
Get the Whole Vault · $67